About Us

PITSA (Plasticos Industriales de Tampico, S.A. de C.V.) is located in Tampico, Tamaulipas, Mexico, about 300 miles South of Brownsville, Texas and within a few blocks of the deep sea port of Altamira. Established in 1965, PITSA has grown to be the largest fabricator of industrial fiberglass products in Mexico. The company occupies over 200,000 sq. ft. of production space and employs over 100 people.

Company Profile:

Started operations: 1965

Location: Plant, Tampico, Mexico, 300 miles S. of Brownsville, TX

Plant: 200,000 square feet

Personnel: Quality Control 4

Design & Engineering 9

Production 180

Administration 5

Sales 7

Equipment: 8 filament winders, capable of winding from 2” to 50 ft. diameter

5 spray-up “chopper” systems

Oven for thermoplastic molding

Products:

Tanks: 18” to 50 ft. diameter (up to 500,000 gallons) .

Flat, cone, dished, sloped bottom

Resins based on chemical environment

Piping: 2” to 120” diameter

Elbows, flanges, transitions

Ductwork: 6” to 120” diameter

Dampers

Elbows

Transitions

Plenums

Scrubbers: 18” to 50 ft. diameter

Stacks: 12” to 50 ft. diameter

Grating: Molded grating 1” to 2” thick

Custom Fabrication: per customer requirements

Services:

Design: Stamped design calculations, FEA Analyses

Drafting: AutoCad drawings

Consulting: Assistance in fiberglass design

On-site Installation: We can provide on-site installation services for large vessels, piping systems, duct systems

Inspection & repair: On-site inspection of fiberglass equipment and repairs